Kluber Klüberoil 4 UH1-1500 N Spray
Synthetic gear and multipurpose oil for the food-processing and pharmaceutical industries
Product Description
Klüberoil 4 UH1-1500 N Spray is registered as NSF H1 for use in the food-processing and pharmaceutical industries and complies with FDA 21 CFR Sec 178.3570. It was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberoil 4 UH1-1500 N Spray can contribute to increase reliability of your production processes. Nevertheless, it is recommended to conduct an additional risk analysis, e.g. HACCP.
Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations, or if no running-in was performed. The good wear protection of both gears and rolling bearings ensures that the service life calculated for the lubricated components is achieved, leading to lower maintenance and repair costs.
Klüberoil 4 UH1-1500 N Spray offers a much longer service life than mineral and white oils due to the excellent ageing and oxidation resistance of the selected raw materials; thus, service intervals can be extended and maintenance costs reduced. The product’s good anti-corrosive properties enable problem-free gear operation.
The good viscosity-temperature behavior supports the formation of a sufficient lubricant film across a wide service temperature range, even at elevated and high temperatures.
The optimized friction behavior enabled by the carefully selected base oils reduces power loss and improves efficiency of your application.
Features & Benefits
- Registered as NSF H1
- High scuffing protection
- Good wear protection for gears and rolling bearings
- Good shear stability for reliable lubricant film formation
- Excellent ageing and oxidation resistance
- Wide service temperature range due to good viscosity-temperature behavior
- Low foaming tendency
- Energy savings due to optimized friction behavior
- Good elastomer compatibility
Application
- Klüberoil 4 UH1-1500 N Spray was developed for the lubrication of spur, bevel and worm gears subject to high loads, bearings, spindles, joints as well as lifting, drive and transport chains.
Application notes:
- Klüberoil 4 UH1-1500 N Spray is miscible with mineral oils and synthetic hydrocarbons. Prior to switchover, lubrication points should be cleaned. In view of the H1 requirements in the food processing industry, any mixture with non-H1 lubricants during conversion has to be prevented.
- Shake well before use. Ensure sufficient ventilation during spraying as explosive mixtures may form. Do not spray against naked flame or onto hot incandescent objects. Observe additional instructions for use in material safety data sheet and on can label.
Datasheets
